AVS TX4-04 WATERPROOF COMPLETE REMOTE FOR AVS A & S SERIES ALARMS
Your Price:
$99.00 inc GST
SKU:
AVSREMOTETX404
Stock Level
In Stock
Description
The AVSREMOTETX404 is a robust waterproof remote that is compatible with some alarm models:
Model: AVSREMOTETX404
Batteries: 2x CR1616
Description: Waterproof rolling code 433Mhz remote
Used for: S-Series range (S5, S4), A-Series range (A5, A4) and 24 volt S-Series range (24VS5)
Alternative option for: 4601, 6000, 9000
Note: not interchangeable with the AVSREMOTETX4043010
Remote coding below:
- Ensure bonnet and boot are closed.
- Arm and then disarm the alarm/immobilizer (the LED light on the dash will go out).
- Turn the ignition to ON.
- Immediately press and hold the lock/unlock button on the original remote (this is the
button used to arm/disarm the alarm). - The siren will start beeping and the indicators will flash.
- As soon as the beeps start (and or the indicators start flashing) release the button on the original remote and immediately press and hold the lock/unlock button on the new remote
until the siren stops beeping.
Note: Make sure you release the original remote button before pushing the new one
because the system will be unable to learn the new remote in if it receives both signals at the
same time. The alarm is only looking for new remotes while it is beeping/flashing. - Turn the ignition off.
- The new remote is now coded in.
- Test both remotes operate the alarm.
