Import Wholesale & Distribution

SKAA PRO RECEIVER STREETHEART PRO AUDIO BAL 6.3MM CONNECTOR

Your Price:
$499.95 inc GST
SKU:
PL5581
Stock Level
In Stock

Description

Need to add an extra pair of monitor speakers to the “band room” in your studio? Upgrade a pair of Focal, Dynaudio, Adam, Genelec, KRK, or Yamaha powered monitors with a single Streetheart to fill that remote room with low-latency audio from your control room.
Love your Mackie, JBL, EV, Alto or QSC powered PA speakers? Great — convert them to lightning-fast SKAA wireless by adding Streetheart.
Love your Soundboks Gen 3 speakers (with SKAA built in) but want to add SKAA wireless capability to your older Soundboks Gen 2 speakers? Just add a Streetheart to those Gen 2s.
Want to add a battery-operated wireless subwoofer to your Soundboks network? Convert a powered sub into a SKAA wireless sub just by adding Streetheart.
Use the level control knob to turn down the blistering output of Streetheart and you can feed consumer-grade gear like bookshelf speakers or your home theatre system.
Feed up to 4 Streetheart Receivers from any SKAA Transmitter (at 36 ms latency) … this is the best general-purpose mode
Feed up to 2 Streetheart Receivers from any SKAA Pro Transmitter (at 19 ms latency) … great for singing, guitar playing, lightning fast scratching and finger drumming
Outputs 1 and 2 can be used for Left / Right audio, or, to handle two completely unrelated signals (for example, FRONT OF HOUSE on Out 1 and FLOOR MONITORS on Out 2)
Got XLR balanced line-level inputs on your amps or powered speakers? Perfect. Just use two ¼" TRS to XLR-M balanced cables to feed your gear from Streetheart.
Want to use unbalanced TS cables? No problem, just plug into Lower Outs 1 & 2 ¼" jacks which support both balanced and unbalanced line-level connections.
Pad switch lets you reduce the output on Upper Out 1 by 6 dB or 12 dB just in case you need to feed a device with a reduced signal level
When using Headphone Outs, the person plugged into Headphone Out 1 can opt to listen quieter by engaging the Pad
Change Outs 1 & 2 to Headphone jacks by engaging the Headphone Switch (meanwhile the Lower Outs 1 & 2 remain bonafide pro-level balanced line outs)
Set the Pad to -12 dB and plug your Headphones into Out 1 to check your incoming audio before powering on your connected amps / speakers
Headphone outs make a perfect live room headphone cue mix setup
Perfect for creating a wireless Headphone cue mix system for your studio
Engage the Split Switch to listen to program 1 audio only on Headphone 1 and program 2 audio only on Headphone 2 — that’s two separate headphone cue mixes from a single Streetheart ! Need four separate cue mixes? Just use two Streethearts.
Supports SKAA Differential mode Transmitters such as the Valerie Mk2 microphone and Jacqueline guitar Transmitter

Four ¼" TRS balanced line-level outputs
Up to 50-meter reliable indoor range with the included +2 dBi antenna (note that your actual range will depend also on the antenna implementation in the transmit-side device)
Legendary Burr-Brown digital to analog converters — nothing but the best
Proper +16 dBu output levels to ensure you can get the max wattage from your connected gear
Feed signal-hungry 19” rack amplifiers (any brand) — feed up to 4 separate amplifiers from a single Streetheart Receiver
Feed up to two pairs of headphones
Works with all headphones having 32 ohms impedance or higher
30-step local Volume control for all four outputs
Local Mute control for all four outputs
11 hour run time from a full charge using Streetheart's internal rechargeable Li-Ion battery
Streetheart’s 18650 Li-Ion battery is user-replaceable so your Streetheart won’t become a useless brick in the future
Streetheart charges from any USB power source (virtually any USB phone charger with a Type A jack will work) — use the included Type A to Type C cable to connect your charger to the Type C charging port on Streetheart’s User Panel